Service 07 · Maintenance & Upgrade
Heating & Cooling Equipment
Planned and reactive maintenance for heating and cooling plant — routine service, breakdown response, and efficiency upgrades to plant that is working but costing too much to run.
0/7Emergency response
0KSA regions covered
0Service lines behind it
Overview
How we approach it.
Most plant does not fail suddenly. It degrades — a fouled coil here, a slipping belt there, a control loop that someone put into hand two summers ago and never put back — until the running cost has quietly doubled and one hot day tips it over.
Planned maintenance catches that drift. Scheduled visits against an asset list, with condition recorded each time so trends are visible rather than rediscovered at the point of failure.
When something does fail, we answer around the clock across the Kingdom. And where plant is working but inefficient, an upgrade is often a better answer than either repair or replacement — new drives, better controls, or a coil change can move running cost materially without touching the rest of the system.
Included in scope
- Planned maintenance
- Reactive breakdown response
- System upgrades
- 24/7 emergency support
On the job
The work, as it runs.
Plant we have installed and equipment we have had apart — photographed on the shop floor and on site, not staged.
Capability
What we can build to.
Ranges below cover the majority of what we make. Duties outside them are reviewed case by case rather than refused on principle.
| Planned maintenance | Scheduled visits against an agreed asset list |
|---|---|
| Reactive response | 24/7 breakdown callout, Kingdom-wide |
| Condition recording | Readings logged each visit so trends are visible |
| Consumables | Filters, belts, refrigerant, water treatment |
| Upgrades | Drives, controls, coil replacement, VFD retrofit |
| Reporting | Written report per visit with recommendations |
Indicative figures. Final specification is confirmed against your duty and site survey at quotation.
Standards & testing
- Condition readings recorded and retained per asset
- Written report issued after every visit
- Refrigerant handling to recognised practice
Process
How the work runs.
The same sequence every time, so you know what happens next and what is expected of you at each stage.
- 01
Asset survey
Plant listed, condition assessed and criticality agreed, so the schedule reflects what actually matters to your operation.
- 02
Schedule agreement
Visit frequency and scope set per asset. Not everything needs quarterly attention, and saying so is part of the job.
- 03
Planned visits
Service carried out to the agreed scope, with readings recorded rather than ticked, and a written report each visit.
- 04
Reactive response
Breakdown callout around the clock, with the asset history already on file so the engineer arrives informed.
- 05
Upgrade recommendations
Where the data shows a component is costing more to run than to replace, we say so — with the numbers behind it.
Applications
Where it is used.
Chillers and chilled water plantCooling towersAir handling unitsBoilers and steam plantCompressorsRefrigeration systems
Related equipment
Parts and plant for this line.
Questions
Asked before you ask.
Do we have to put all our plant on contract?
No. Contract the critical assets and call us reactively for the rest if that suits you better. We would rather cover what matters properly than everything superficially.
What does 24/7 actually mean?
A phone answered by someone who can dispatch an engineer, at any hour, across Jeddah, Riyadh, Dammam and Makkah. Response times vary by location and are agreed in the contract rather than promised generically.
Will you service plant you did not install?
Yes — most of it. We survey first so the schedule reflects the plant’s real condition rather than an assumed one.
Also from GBGCC
Other service lines.
Shell & Tube Heat Exchanger
Custom-engineered shell and tube heat exchangers for process industries — from initial thermal design through precision fabrication, pressure testing, and field re-tubing of existing units.
Read more
Evaporative Condensers
Evaporative condensers and closed-circuit cooling towers for refrigeration systems, process cooling, and industrial applications requiring efficient heat rejection with minimal water consumption.
Read more
Air-Cooled Condensers
Air-cooled heat rejection equipment for applications where water availability is limited — from process radiators and dry coolers to refrigeration evaporators and industrial condensers.
Read moreReady to start?
Breakdown response and planned maintenance, Kingdom-wide
Seven service lines. One engineering team. Tell us your load, site and timeline — we will come back with a costed proposal.